TEL:

0086-13455388360

CRM1000-A Common Rail Injector Stroke Measuring System

Name:*
     Tel:
 Email:*
  Note:

Content

CRM1000-A Common Rail Injector stroke measuring system, which includes almost all common rail injectors stroke measuring standard data inside. Suitable for BOSCH, CAT, DENSO, DELPHI, SIEMENS injectors and so on .
It can test:
1.Adjust Needle Lift
2.Adjust Needle Opening Pressure
3.Adjust Total Lift of Armature Assembly
4.Adjust Actual Lift of Armature Assembly
5.Adjust Solenoid Air Gap
6.Adjust Solenoid Spring Compression
7.Driving Armature
Common Rail Injector Repair Stage 3 Rebuild Injector after Component Being Replaced:
Injector Critical dimensions are accurately controlled by using the calibration shims or spacers of exact thicknesses in the injector during injector rebuild to meet Bosch spec tolerance of 1um.
1:Intuitive, step-by-step instruction to direct user to rebuild injector 
Measure thickness of calibration shims 
Measure dimension of injector components 
Provide the required thickness of calibration shims 
2:Complete database to cover Bosch common rail injectors 
CRI 1, CRI 2, CRI 3 for Automotive engine 
CRIN 1, CRIN 2 for Commercial vehicle engine
Pre:NO.613 DELPHI Genuine common rail fuel pump transfer pump kit 28303795 Next:DT-A0023 Full System Engine Disassemblyfree Set(Suspension Bottle Type)